What is the best volume setting for my stereo receiver connected to an in-ceiling stereo with volume controls? - best stereo receivers 2009
I plan on delivering 110W RMS per channel into 8 speakers in my house that a series of 60-120W each have. Because it is a private room, each room has its own volume control. My question is: What is my best option to set the master volume for optimal sound with my volume controls in the room? It is also a way to bypass the master volume control on the receiver, so that a volume control is in the rooms (provided, for example) a certain type of receiver?
Friday, December 11, 2009
Best Stereo Receivers 2009 What Is The Best Volume Setting For My Stereo Receiver Connected To An In-ceiling Stereo With Volume Controls?
4 comments:
I do not know exactly how it is to connect the speakers to the stereo receiver 8 with the delivery of 110 Watts RMS per channel in touch. The idea seems to be one of those crazy DIY projects, where some teams pay the price. Could be (Typically, the speakers, but since you have some additional volume control on the soup, then perhaps the receiver will be the guinea pigs this time)
If this ceiling "Stereo" is a multi-room, you need a controller with support for an external device as the source and perhaps the connections are made over the plain line (usually with RCA connectors, not the amplifier speaker terminals), then will bypass the receiver and volume control. Then the tables of the volume control in each room or the control unit will have the necessary built-in amplifier. So do not "required volume for the recipient need.
If you only connect cable, then maybe a controller or a multi-channel amplifier before connecting the receiver to be necessary there. This is because the stereo not drive amplifier for the speakers of 8 out of the box should also be assessed a minimum impedance of the speakers at the terminals of each speaker connected (so do not try, even though I know how the 8 speakers connected are) and the impedance of the final system.
But how do you refer your question to the level of volume and not, like everything connected to it ....
Because you really know (what you do and you can actually get the system) all wired and working conditions, I believe, is the best way to get optimum sound to:
1) Select the test material (CD or radio). But I suggest you get more than what you hear.
2) the volume of the receiver shall determine the minimum on and off.
3) Adjust the volume control in each room to a minimum and only be the biggest adjustment of the volume to the maximum space (which is our rehearsal).
Turn 4) on the receiver and increases the volume to desired level of maximum volume in the hall of the "evidence" obtained (the maximum volume as band the maximum volume of the comfort that you like or) just the height of the maximum volume without distorton ear.
This will use the optimal volume for the recipient.
(Do not forget to set the volume at each min and off the receiver - The volume should be in each room, regardless).
Now check the performance only small space, so that the maximum noise level is comfortable (but, as we will for the largest test equipment and is not always used at full volume, it must be good) and then test several pieces at a time until they see how the whole system performs. Adjusting the volume in a room should be without prejudice to the other rooms, or they will not work.
To circumvent the volume of the receiver to use the line level outputs (RCA connectors typically have a "home" or "pre-amp) and an external amplifier for each additional piece (without using the volume control to bypass the receiver and amplifier) .
The real solution requires Multiple SpecificationsIFIC multi-zone audio distribution devices to multiple sources of control, so you can listen to different sources in each field. Try this link:
If you use the volume controls for impedance matching, impedance matching, or other device to get any problems with it. This is often done. I just want to do everything possible to monitor use of all speakers at high volume. Some brands of receivers are less expert in this type of use than others (I would not try it on a Sony). If you overload the receiver, a good brand goes into protect mode before firing. The plumbers were working in a shop for the frequent use of two receivers, amplifiers strong distribution channels, as if the client had its own (which is also a pair of fat, old, with an excess of receptors, which we sometimes sold as an amplifier of economic distribution ). You do not want the output of the receiver is too high or too low. The two sides will be a distortion of the final product. Since the receiver output will create the maximum volume of the speakers, put the volume to maximum level to which I listen to the speaker with the volume all the way and expect with the greatest number of speakersuse when I want to use simultaneously.
Good idea in theory, bad idea in practice. As you increase the volume in a room, the source will reduce the volume in other parts. Also added that the fact that so many speakers piggybacking impedance together represent around 1 OLM (assuming that all the speaker 8 OLM) and has a perfect recipe for a blown receiver.
You should talk to a specialist for audio distribution.
I need a little more information in the system is a receiver that the ability to have up to 8 speakers, and each room has an on / off and volume control? Move to 4 speakers per room or 2 per room? Can you describe the team we have now, and I can not help you.
Post a Comment